Identification of Compounds that Selectively Stabilize Specific G‐Quadruplex Structures by Using a Thioflavin T‐Displacement Assay as a Tool

Small molecules are used in the G‐quadruplex (G4) research field in vivo and in vitro, and there are increasing demands for ligands that selectively stabilize different G4 structures. Thioflavin T (ThT) emits an enhanced fluorescence signal when binding to G4 structures. Herein, we show that ThT can be competitively displaced by the binding of small molecules to G4 structures and develop a ThT‐displacement high‐throughput screening assay to find novel and selective G4‐binding compounds. We screened approximately 28 000 compounds by using three different G4 structures and identified eight novel G4 binders. Analysis of the structural conformation and stability of the G4 structures in presence of these compounds demonstrated that the four compounds enhance the thermal stabilization of the structures without affecting their structural conformation. In addition, all four compounds also increased the G4‐structure block of DNA synthesis by Taq DNA polymerase. Also, two of these compounds showed selectivity between certain Schizosaccharomyces pombe G4 structures, thus suggesting that these compounds or their analogues can be used as selective tools for G4 DNA studies.     

Molecular Design Principles for Near‐Infrared Absorbing and Emitting Indolizine Dyes

Desirable components for dye‐sensitzed solar cell (DSC) sensitizers and fluorescent imaging dyes include strong donating building blocks coupled with well‐balanced acceptor functionalities for absorption beyond the visible range. We have evaluated the effects of increasing acceptor strengths and incorporation of dye morphology controlling groups on molar absorptivity and absorption breadth with indolizine donor‐based dyes. Indolizine‐based D –A and D –π–A sensitizers incorporating bis‐rhodanine, tricyanofuran (TCF), and cyanoacrylic acid functionalities were analyzed for performance in DSC devices. The TCF derivatives were also evaluated as near‐infrared (NIR)‐emissive materials with the AH25 emissions extending past 1000 nm.     

Dynamic Molecular Metamorphism Involving Palladium-Assisted Dimerization of π-Cation Radicals

A dynamic supramolecular approach is developed to promote the π-dimerization of viologen radicals at room temperature and in standard concentration ranges. The approach involves cis- or trans-protected palladium centers serving as inorganic hinges linking two functionalized viologens endowed with metal-ion coordinating properties. Based on detailed spectroscopic, electrochemical and computational data, we show that the one-electron electrochemical reduction of the viologen units in different dynamic metal/ligand mixtures leads to the formation of the same intramolecular π-dimer, regardless of the initial environment around the metallic precursor and of the relative ratio between metal and ligand initially introduced in solution. The large-scale electron-triggered reorganization of the building blocks introduced in solution thus involves drastic changes in the stoichiometry and stereochemistry of the palladium/viologen complexes proceeding in some cases through a palladium centered trans→cis isomerization of the coordinated ligands.     

水胁迫下典型盐生植被梭梭光谱特征分析

荒漠地区由于气候干燥，降水稀少，水分常成为制约植被生长的因素之一，水分胁迫对植物长势和产量的影响比任何其他胁迫都要大。随着高光谱技术的发展，国内外已有众多学者利用高光谱数据研究植被遭受胁迫作用，然而这些研究对象多集中于甜菜、棉花、玉米、水稻等作物，针对干旱区盐生植被遭受胁迫作用的研究较少。梭梭作为荒漠、半荒漠地区的典型盐生植被之一，具有极高的经济和生态效益。选择梭梭作为研究对象，培育一年生梭梭，并设置三个水分梯度，形成受不同水分量胁迫的梭梭。使用原始光谱、红边位置参数，结合植被指数及二维相关光谱研究其叶片光谱特征，为干旱区利用高光谱遥感监测盐生植被提供借鉴。结果表明：(1)分析梭梭叶片反射光谱曲线发现，在可见光至中红外各波段范围内，受不同水分量胁迫作用的梭梭叶片光谱反射率有显著差异。在可见光(350～610 nm)波段，各水分处理的梭梭叶片反射率依次为100 mL>500 mL>200 mL，这是由于100和200 mL水分促进梭梭内部叶绿素合成，使该波段反射率降低，而过多的水分(500 mL)对梭梭内部的叶绿素合成没有更大的促进作用。在红光区(611～738 nm)，随着水分量的增多，受不同水分量胁迫的梭梭叶片光谱反射率依次减小。在738～1 181和1 228～1 296 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：200 mL>100 mL>500 mL；在1 182～1 227 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：100 mL>200 mL>500 mL。这是由于植被细胞结构对近红外区域的反射率影响较大，因而受不同水分胁迫作用的梭梭叶片光谱反射率有显著差异。在1 300～1 365和1 392～1 800 nm波段，受各水分胁迫作用的梭梭叶片反射率为：100 mL>200 mL>500 mL。这表明在500 mL水分胁迫量范围内，水分越多，叶子的细胞液、细胞膜对水分的吸收能力越强，使得反射率下降。通过对原始光谱求取一阶导数并提取红边位置参数发现，各水分处理下的梭梭叶片一阶微分光谱曲线中红边位置未发生移动。这是由于梭梭在长期的干旱环境影响下，形成了特殊的适应机制，水分对其红边位置影响不敏感。(2)选取若干植被指数分析各水分处理下的梭梭光谱指数变化。当水分胁迫量由100 mL增至200 mL时，WI/NDWI，MSI和NDII指数值变化显著，可用于研究水分胁迫下梭梭的光谱特征。(3)使用二维相关光谱技术分析受各水分胁迫作用的梭梭光谱特征，得出在100 mL水分胁迫下，在536，643，1 219和1 653 nm波段处，吸收峰对水分的微扰敏感；在200 mL水分胁迫下，在846和1 083 nm波段处，吸收峰对水分的微扰敏感；在500 mL水分胁迫下，在835和1 067 nm波段处，吸收峰对水分的微扰敏感。总之，在近红外波段，与100 mL水分量相比，梭梭受200和500 mL水分量胁迫时，吸收峰对水分的微扰敏感度上升。由100 mL水分胁迫下梭梭的二维同步相关谱图可知，1 044和1 665 nm，1 072和903 nm，903和1 264 nm，1 230和1 061 nm波段处形成正交叉峰，表明这些波段处光谱强度随水分的干扰同时变化。     

Graphene and graphene like 2D graphitic carbon nitride: Electrochemical detection of food colorants and toxic substances in environment

Excessive consumption of substances such as food colorants, exposure to doses of metal ions, antibiotic residues and pesticides residues above maximum tolerance limit have a detrimental effect on human health. Hence in detecting these harmful substances, the development of sensitive, selective and convenient analytical tools is an essential step. Graphene and graphene like 2D graphitic carbon nitride have shown great promise in the development of electrochemical sensors for determining the levels of these substances in different samples. In this paper, graphene and graphene like 2D graphitic carbon nitride applications on the determination of various food colorants in foods and drinks such as azo dyes (tartrazine, allura red, amaranth, carmine and sunset yellow); metal ions contaminants, antibiotic and pesticide residues in the environment are reviewed.     

Manganese(III) porphyrin supported onto multi-walled carbon nanotubes for heterogeneous oxidation of synthetic textile dyes and 2,6-dimethylphenol by tert-butyl hydroperoxide

Manganese porphyrin has been supported onto multi-walled carbon nanotubes (Mn(TCPP)OAc@MWCNT) and characterized by powder X-ray diffraction, FT-IR, atomic absorption and UV–vis spectroscopy, field emission scanning electron microscopy (FE-SEM) and also thermogravimetric analysis (TGA). The TGA curve shows that the nanocatalyst was thermally stable up to almost 350 °C. This catalyst was found to be able to oxidize different synthetic textile dyes in aqueous media over a wide pH range at ambient temperature with tert-butyl hydroperoxide (TBHP) as the oxygen source. The influence of some important parameters such as the initial pH of the dye solution, temperature and concentration of the catalyst, the oxidant and the co-catalyst were investigated. Also, the ability of this heterogeneous catalyst to oxidize 2,6-dimethylphenol (with excellent selectivity for quinone (86%)) with TBHP in acetonitrile was evaluated. The separation and recycling of the catalyst is simple and the catalyst can be used several successive cycles without significant decrease in catalytic activity.     

Imine‐linked porous organic polymers showing mesoporous microspheres architectures with tunable surface roughness

Different kinds of porous organic polymers (POPs) bearing 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) fluorophores have been developed to generate singlet oxygen upon light illumination. Herein, four imine‐linked POPs were prepared by copolymerization of amine and aldehyde with different ratios of di‐aldehyde A1 and A2. The POPs were investigated by a combination of techniques such as solid ¹³C NMR, FTIR, and nitrogen absorption–desorption isotherms and electronic microscopy. The results demonstrated that these POPs were prone to form hierarchical porous architectures. Scanning electron microscopy and transmission electron microscopy images revealed that the spherical morphologies showed different roughness, that is, BDP‐POPs with more BDP aldehyde A2 presented rougher surface. Finally, these POPs were used to generate singlet oxygen (¹O₂) monitored by 1,3‐diphenylisobenzofuran and bioimaging in HeLa cells. Our results indicated that the ability to generate ¹O₂ is dependent on the amount of BDP. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 319–327     

Effect of microencapsulation using soy protein isolate and gum arabic as wall material on red raspberry anthocyanin stability,characterization, and simulated gastrointestinal conditions

This study involves microencapsulation of anthocyanin extract (AC) from red raspberry using a freeze drying technique involving ultrasonication of soy protein isolate (SPI), gum arabic (AG), and their combination. Analyses included microcapsule properties, encapsulation efficiency, antioxidant capacity using the DPPH assay, Fourier-transform infrared spectroscopy (FTIR), color, thermal stability, stability during storage, morphology, and simulated gastrointestinal conditions. Encapsulation efficiency (EE) ranged from 93.05% to 98.87% for all microcapsules. The morphology of microcapsules by scanning electron microscopy (SEM) indicated a broken glass shape, with mean size of microcapsules ranging from 21.07 ± 2.71 μm to 48.19 ± 2.33 μm using Mastersizer analyzer. A good relationship obtained between zeta potential (ZP) and FTIR spectrum indicated that there is a chemical cross linking interaction between wall material and core material. All microcapsules enhanced the thermal stability of AC in the temperature range 80–114 °C. Furthermore, AC retention (up to 48%) during storage at 37 °C for 60 days revealed that treatment H combination of SPI and AG was best. In addition, SPI and AG combination presented good release behavior under simulated gastrointestinal conditions compared with unencapsulated anthocyanin.     

Anchored Synthesis for Some Novel Mono and Disarylazo 1,2,4-Benzothiadiazine-Based Dyestuffs as Alternatives for Benzidine-Based Dyes

A one mono and two disarylazo series of 1,2,4-benzothiadiazine-based dyestuffs has been synthesized with a view that these products, with their new all-round tinctorial properties, might find an application as new categories of direct dyes that satisfactorily replace prohibited benzidine-based dyes.

The assigned structures for the hitherto prepared dyes were confirmed on the basis of elemental analysis as well as spectral data and, whenever possible, by alternative synthetic routes. Moreover, the predominant tautomeric structures for these highly colored products were tested and discussed on the basis of their spectral behavior.